Automatic 2400 6X12 Short Cycle Hot Press Line

Precise and advanced CNC machines account for 65% of the whole equipment investment.Our company have over 20 years history.

The main technical parameter of 2400T 6×12 hot press machine automatic line

1, Total pressure: P=24000KN

2, Size of heating plate: 3850mm×1940mm

3, Board size: 3660mm×1830mm

4, Main cylinder: D=400mm  Quantity:8

5, Daylight: H=350mm  

6, Loading in width direction, Paper feed manually, automatic trimming.

No.	Name	Parameter	Remark
1	Finished Specification	(8~30)×1830×3660mm
2	Pressing Cycle	According to technological request	About 50s
3	Specific pressure	24000kN(2400 ton)
4	Unit working pressure	≤35.8kg/cm2
5	Size of heating plate	1940×3850mm
6	Daylight opening	350mm
7	Main cylinder(Diameter×stroke)	400×350mm  8 units
8	Oil pressure of hydraulic system	≤25MPa
9	Temperature of heating plate	≤210°C
10	Temperature control of heating plate	Temperature control meter by digital setting(With secondary cycling system)	prepared by user self
11	Temperature control precision of heating plate	(Upward and downward heating plate controlled separately)
12	Working of loading device	Clamp type
13	Speed of loading device	≤70m/min
14	Drive mode of loading device	Inverter
15	Control mode of whole wire	PLC
19	Arrangement of energy	0.48MW(40×104 kcal/h)
20	Heating media of heating plate	Thermal oil (Boiler prepared by user self)
21	Total power:	~90kW
22	Arrangement of compressed air	~3.5m3/min  0.6Mpa
23	Wind quantity of ash separator of brusher	(Compressed air prepared by user self)~7000m3/h
24	Gross Weight	~140000kg Whole line
25	Size of the line (Length×Width×Height)	51000×11500×4000mm (Above the ground)

Details of Line:

1)            Loading lifter

Gross weight:   1000 kg

Function: Feeding the pallet of board to the lifter. Then it will hold in the right position to make the board loading easily. It was control by the hydraulic system and photo electricity reply.  

2)            Loading Belt table

Gross weight:   1000 kg

Function: Worker can lay down the paper with board together, and it will transfer into the press automatically. We using Germany brand Moto.

3)            Main press

Gross weight: 58000 kg

Function: Laminated the products. With extra support part to enlarge the strength of machine body. Main hydraulic valve was using germany brand. It request cooling system for hydraulic system and secondary recycling heating system for heating plates.  

4)            Vacuum Unloading system

Gross weight: 2000 kg

Function: After laminated, the vacuum unloading plate will take out the board inside the press. It avoid the scratch of the board and make the worker’s job easy.  

5)            Unloading lifter

Gross weight:   1000 kg

Function: Lay down the board to the lifter. It can hold in the right position to make the board unloading easily. It was control by the hydraulic system and photoelectricity reply.  

6)            Cooling System for hydraulic oil(Option)

Gross weight:   400 kg

Function: Cooling down the hydraulic oil’s temperature and extend the lift of hydraulic parts. 

7)            Secondary recycling heating system (Option)

Gross weight:   500 kg

Function: The pipe system with temperature control valve can keep the temperature correctly and make sure it changed in small Torrance. It was the best solution for heating system.

( function(){ var aBigImageSrc = [ 'http://i00.i.aliimg.com/photo/v5/474183974_1/Automatic_2400_6X12_Short_Cycle_Hot_Press.jpg' , 'http://i00.i.aliimg.com/photo/v5/474183974_2/Automatic_2400_6X12_Short_Cycle_Hot_Press.jpg' , 'http://i00.i.aliimg.com/photo/v5/474183974_3/Automatic_2400_6X12_Short_Cycle_Hot_Press.jpg' , 'http://i00.i.aliimg.com/photo/v5/474183974_4/Automatic_2400_6X12_Short_Cycle_Hot_Press.jpg' , 'http://i00.i.aliimg.com/photo/v5/474183974_5/Automatic_2400_6X12_Short_Cycle_Hot_Press.jpg' , 'http://i00.i.aliimg.com/photo/v5/474183974_6/Automatic_2400_6X12_Short_Cycle_Hot_Press.jpg' ]; var oProductShow = new AE.run.minisite.productShow(); oProductShow.init( { 'aImgSrc': aBigImageSrc } ); } )(); Automatic 2400 6X12 Short Cycle Hot Press Line